Packaging Standards

The leaner rack may be constructed of wood or steel if returnable. If constructed of wood, the two runners are 4″ x 6″ 8’+ long. The uprights are 4″ x 4″ x ~=7.75′ and are fastened to the runners with .75″ nuts, bolts, and flat washers. Three 4″ x 6″ x 63″ cross members tie the runners together and one the uprights. A 2″ x 4″ x 96″ cross member is also attached to the uprights. The two rack leaners or diagonals measure 4″ x 4″ and are placed such that doors assume a 45 degree angle. A 2″ x 4″ ~=120″ board is applied at the top of the leaners providing support for the doors in the rack. Two 1″ x 4″ x ~=10.5′ boards may be placed between each door in order to keep them from contacting one another. The doors are secured to the leaner rack fixture with three 1.25″ non-metallic bands.
Leaner Rack: May be Returnable