Packaging Standard for:
ADJUSTER, SLACK
Number: ADJ-3
Dimensions (inches)
Height: 24 Width: 48 Length: 48
Height: 24 Width: 48 Length: 48
Std. Qty. Varies
Gross Weight (LBS): Varies
Date: 6/2016
Revision:
Description:
Place ten or fewer slack adjusters on a 48″ x 48″ pallet. The adjusters are to be laid parallel to one another. They are secured to the pallet with two 1.25″ non-metallic bands. There is no need to apply a crate for less than eleven slack adjusters, the pallet is sufficient.
Place eleven or more slack adjusters in layers of up to ten per layer in a 48″ x 48″ crate. The adjusters are to be laid parallel to one another. A 44″ x 44″ piece of chipboard or corrugated must be placed between each layer as a separator. In both cases, control rods must be secured/attached to each slack adjuster.
Pallet: PAL-6 Crate: CRA-3 or equivalent